| Click here to download printable catalogue in Adobe Acrobat Format (151Kb). | Need
Acrobat? |
Catalogue
| The
NZ Finescale catalogue is full of illustrations and other links.
Just click on underlined entries for more information.
So, ES021 is an S scale etched product. |
|
|
1:64 scale pewter people |
||
| FS001 | Charlie Walking figure, smoking with coat over shoulder | $4.50 | |
| FS002 | Sam Standing figure, hands in pockets, sleeves rolled. | $4.50 | |
| FS003 | Bill Relaxed standing figure. Overcoat, scarf and crewcut. | $4.50 | |
| FS004 | Frank Relaxed standing plain figure | $4.50 | |
| FS005 | George Standing hatted figure with newspaper | $4.50 | |
| FS006 | Louis Locomotive fireman in overalls. | $4.50 | |
| FS007 | Jack Standing guard or porter | $4.50 | |
| FS008 | Peter Standing Engine driver, hand on regulator. | $4.50 | |
| FS009 | Jim Seated driver, hand on regulator | $4.50 | |
| FS010 | Doug Railwayman. Jacket over shoulder | $4.50 | |
| FSset1 | Full set of 10 figures One each of FS001-FS010 | $40.00 | |
|
Locomotive Kits |
 |
||
| LS001 | Baldwin Wb 2-6-2T Locomotive | $600.00 | |
|
A fully featured locomotive kit in etched and cast brass/nickel silver.
Chassis is split frame with North Yard metal drivers. Instructions come
on a lavishly illustrated CDROM.
|
In stock | ||
| LS002 | Baldwin Wd 2-6-4T Locomotive | $600.00 | |
| As
LS001
|
In stock | ||
|
Full Kits |
|
||
| KS001 | Single Arm McKenzie & Holland Semaphore Signal | $29.95 | |
| Features
finely etched details and brass castings. Colour matched spectacle lenses.
Designed to operate.
Article downloads on construction
and actuation available.
|
In stock | ||
| KS002 | Iron 'L' Wagon | $45.00 | |
| Features
sprung suspension, full underframe detail and brakes, internal detail. (Construction article is available for download) |
In stock | ||
| KS003 | Double Arm McKenzie & Holland Semaphore | $62.50 | |
| Comprises
2x KS001 plus an extra etch containing the additional parts required.
Article downloads on
construction and actuation available.
|
In stock | ||
| KS004 | 4-Wheel Underframe 8'-6" wb (Diagram 305) | $35.00 | |
| Etched
and cast brass construction. Features our usual suspension system.
This underframe was used under early class G, J, K, L,W, X, and other
wagons.
|
In stock | ||
| KS005 | 15' Wooden Highsider L1 (4 plank, diagram 305) | $45.00 | |
| As
for KS004, but includes injection moulded plastic body parts.
|
In stock | ||
| KS006 | 15' Wooden Highsider L2 (5 plank, diagram 305) | $45.00 | |
| Similar
to KS005 in the higher body style.
|
In stock | ||
| KS007 | Hopper Wagon Q3 (Diagram 1974) | $49.50 | |
| Etched
and cast brass construction. Features our usual suspension system. Our
best work!
|
In stock | ||
| KS008 | Hopper Wagon Q2 (Diagrams 2251/1974) | $49.50 | |
| Similar
to Q3 above, but with longer underframe and wooden headstocks.
|
In stock | ||
|
Detail Etches |
|
||
| ES001 | Passenger Car Verandah Railings and Gates | $14.95 | |
| Etching
only. Includes brake handwheel and gangways. Gates can be made hinged.
Includes assembly jigs. Needs 0.3mm hard brass wire to complete
|
In stock | ||
| ES003 | Fishplates for track (96 pcs) | $5.00 | |
| Give
your track a lift! Cosmetic fishplates for code 80/83/100 rail
|
In stock | ||
| ES004 | Ladders | $6.00 | |
| Five
ladders (scale 15' long) with assembly jig. Requires 0.3mm wire for rungs.
|
In stock | ||
| ES006 | Wirework for Birdcage Cars | $14.95 | |
| Two
lengths of wirework exquisitely etched. An upgrade for kits or
scratchbuilds. Continuous lengths enable any of the prototypes to be
modelled.
|
In stock | ||
| ES008 | 4 Wheel wagon axleguards/suspension system (for 1 wagon) | $5.00 | |
| Make
you stock stay on the track, reduce noise and improve the 'look' with these
'leaf' spring principle units
|
In stock | ||
| ES009 | 4 Wheel wagon brake gear | $5.00 | |
| As
used in the 'Iron L' kit KS002, and designed for use with the shoes of
springing kits ES008 and ES018. Contains levers, mounts, safety loops,
stretchers, rods etc.
|
In stock | ||
| ES011 | McKenzie & Holland Bracket semaphore parts | $10.00 | |
| Brackets,
cranks etc. to enable KS001/003 to be converted to brackets and gantries.
Article download on construction
available.
|
In stock | ||
| ES013 | Targets and Shunting Signals | $7.50 | |
| One
each of L & R shunting and trap signals. Needs a BS011 per signal to
complete
|
In stock | ||
| ES014 | '4 Pane' Signal Box Window Set complete with louvres | $19.95 | |
| Enough
windows to build all but the largest of NZR signal boxes with windows of
this type.
|
In stock | ||
| ES017 | Suburban passenger car windows (24) | $14.95 | |
| Nice
window frames featuring a fold over toplight with integral glazing slot for a
great look.
|
In stock | ||
| ES018 | 4 wheel wagon suspension system (for 1 wagon) | $5.00 | |
| Similar
to ES008 but designed to operate behind existing kit axleugards
|
In stock | ||
| ES021 | Point Rodding A frames | $6.00 | |
| 60
A frames that can be assembeled in gangs
|
In stock | ||
| ES024 | Steam Locomotive Cab Fittings | $14.95 | |
| Steam
loco cab goodies, including weather shields, hand grabs gauges etc. - Lovely
|
In stock | ||
| ES025 | Turnout Bedplates for code 70 rail | $14.95 | |
| Makes
one #9 or #7.5 Turnout
|
Out of stock | ||
| ES026 | Bedplates (225) for code 70 rail | $10.00 | |
| Plain
track, 4 hole bedplates
|
In stock | ||
| ES027 | Pulleys and Cranks | $14.95 | |
| Detail
parts to enliven the permanent way.
|
In stock | ||
| ES028 | Locomotive Hornblocks | $3.95 | |
| Fits
North Yard square bearings, simplifying chassis construction.
|
In stock | ||
| ES036 | Sidechain Hooks and eyes (32 each) | $5.00 | |
| Uniform,
goodlooking hooks etched in 0.45mm nickel silver.
|
Out of stock | ||
|
Lost wax castings |
|
||
| BS001 | Loco superheater cover (1) | $6.00 | |
| Originally
for my WE project, Suits other NZR types.
|
In Stock | ||
| BS003 | WE/B Loco Wheel | $5.00 | |
| Unmachined
casting.
|
Special order | ||
| BS004 | W Loco wheel | $5.00 | |
| Unmachined
casting. Correct 12 Spoke pattern
|
Special order | ||
| BS005 | Semaphore Signal parts | $6.00 | |
| Kerosene
lamp, finial and arm back plate.
|
In Stock | ||
| BS006 | 4 NZR Couplers with 2 Hooks | $6.00 | |
| Pre-drilled,
accurate hooks, conforms to proposed standards.
|
In Stock | ||
| BS007 | Wagon Underframe detail parts | $6.00 | |
| 6"
Westinghouse set, brake ratchet and handbrake pivot.
|
In Stock | ||
| BS008 | 4 NZR Couplers with Hooks (Fits Kadee draftbox) | $6.00 | |
| Pre-drilled,
accurate hooks, conforms to proposed standards. Quick and easy interchange
with knuckle couplings
|
In Stock | ||
| BS009 | Coil springs and axleboxes for wagons | $6.00 | |
| Cosmetic
springs and axleboxes. Designed for use in conjunction with ES008 for a
working suspension system. Also see BS017
|
In Stock | ||
| BS010 | Westinghouse air pump | $6.00 | |
| Type
'F' 8" x 81/2"
Pump usual for smaller locos than class Ab.
|
In Stock | ||
| BS011 | Ground signal bases and lamp | $6.00 | |
| One
each of Trap base, Shunt disc base and lamp. Needs ES013 to complete
|
In Stock | ||
| BS012 | Handrail stanchion bases (5) for signals | $6.00 | |
| Needed
for bracket and more complex signal arrangements
|
In Stock | ||
| BS013 | Air brake hoses and cocks for cars & wagons (4) | $6.00 | |
| These
delicate castings are very close to true scale, and fit within the headstock
dimensions - as they should.
|
In Stock | ||
| BS014 | Standard loco chimney (A, Ab etc.) | $6.00 | |
| A
nice casting from a pattern by Peter Ross.
|
In Stock | ||
| BS017 | Coil springs and 3G axleboxes for wagons | $6.00 | |
| Similar
to BS009. More modern axlebox pattern.
|
In Stock | ||
| BS024 | Yard ground throw | $6.00 | |
| Another
nice casting from a pattern by Peter Ross.
|
In Stock | ||
| BS026 | 'Torpedo' ventilators (4) | $6.00 | |
| A
nice casting from a pattern by Peter Ross.
|
In Stock | ||
|
Really delicate foliage etched in 0.1mm brass. Easy construction methods make modelling these distinctive New Zealand plants a breeze. Click logo for a diorama image. |
|
||
| ES031 | Tree fern | $20.00 | |
| Enough
fronds for a really decent punga tree.
|
In Stock | ||
| ES032 | Cabbage trees | $20.00 | |
| 5
individual heads for this distinctive New Zealand tree lily
|
Out of Stock | ||
| ES033 | Ferns | $20.00 | |
| 168
individual fronds arranged in strips for ease of use.
|
Out of Stock | ||
| ES034 | Flax bushes | $20.00 | |
| Two
large flax bushes
|
In Stock | ||
| ES035 | Toi Toi | $20.00 | |
| Two
large bushes.
|
Out of Stock | ||
|
9mm Scale Signals Full Kits |
|
||
| K9001 | Single McK & H Semaphore signal | $60.00 | |
| Etchings
in 0.25mm brass and 0.45mm nickel silver with brass lamp, finial and other
castings. Working
arms and lamps are readily achieved. Decals for arm stripes included
|
In Stock | ||
| K9003 | Double McK & H Semaphore Signal | $130.00 | |
| Comprises
2x K9001 plus many extra parts need for double and more complex signalling
arrangements.
|
In Stock | ||
|
9mm Scale Signals Detail Etchings |
|
||
| E9011 | Bracket McK & H Semaphore Signal parts | $30.00 | |
| Brackets,
cranks, torsion bar mounts and other parts. Needs KS003 kits to complete.
|
In Stock | ||
| E9013 | Target and Shunt Signals | $20.00 | |
| One
each of left and right shunting and trap signals, with cranks and balance
weights etched in 0.25mm brass. Needs B9004 lamp and B9005/B9006 base
castings (below) to complete.
|
In Stock | ||
| E9027 | Pulleys and Cranks | $35.00 | |
| Compensators,
turnout cranks and signal wire pulleys for permanent way. Etched in 0.45mm
nickel silver.
|
In Stock | ||
| E9032 | Post Mounts for Shunt Signals | $5.00 | |
| One
each of left and right post mounts plus cranks etc etched in 0.45mm nickel
silver. Use with E9013 discs
and B9004 lamp castings to model shunting discs on signal posts.
|
In Stock | ||
|
9mm Scale Signals Lost wax castings |
|
||
| B9001 | McKenzie & Holland Finial | $7.50 | |
| One
finial cast in brass.
|
In Stock | ||
| B9002 | Signal Lamp | $7.50 | |
| One
lamp cast in brass.
|
In Stock | ||
| B9003 | Semaphore parts | $7.50 | |
| One
each of lamp bracket, arm plate and arm bracket - cast in brass.
|
In Stock | ||
| B9004 | Ground Signal Lamp | $7.50 | |
| One
lamp cast in brass, suitable for all trap and shunt signals.
|
In Stock | ||
| B9005 | Shunt Signal Ground Base | $7.50 | |
| One
base cast in brass, suitable for shunt signals (wire operation).
|
In Stock | ||
| B9006 | Trap Indicator Ground Base | $7.50 | |
| One
trap indicator base cast in brass (rod operation).
|
In Stock | ||
Postage/packing and handling $4 on NZ mail orders please.
 |
Overseas please enquire - typically $10 (economy air) To order please contact us You will have noticed that this list contains a number of esoteric items of relatively narrow appeal. If such items are listed as 'out of stock' or 'special order', restocking will depend on customer demand. Therefore, should you require one of these items, please enquire. |
|
|
|
